Construction & Building
Mesh and barrier systems for active sites, concrete work, openings and permanent building protection.
Consultar esta aplicaciónCómo abordar esta aplicación
Construction procurement often combines temporary safety needs with permanent reinforcement or boundary work. Start with the installation stage, exposure, required rigidity and handover condition so the mesh form and finish suit the actual sequence of work.
Requisitos que el comprador debe definir primero
Use estas preguntas para convertir una aplicación general en unos requisitos de compra útiles.
Work stage
Separate temporary site protection from permanent building components.
Opening risk
Identify excavations, lift openings, edges and restricted work zones.
Handling cycle
Confirm whether panels are fixed once or moved repeatedly between phases.
Site exposure
Review weather, impact, dust and finish expectations before selection.
Proceso de selección
Cuatro decisiones mantienen la conversación sobre el producto vinculada al entorno de trabajo real.
Map the hazard
Mark edges, openings, traffic routes and public interfaces.
Choose the format
Compare rolls, rigid panels, framed units and hoarding systems.
Confirm fixing
Coordinate bases, posts, clamps, gates and adjacent structures.
Plan delivery
Group supply by work stage, floor or installation zone.
Grupos de sistemas recomendados
Estos son puntos de partida para la comparación. La selección final depende de las dimensiones, la exposición y los requisitos del proyecto.
Site perimeter and hoarding
Visible separation for active work zones and public interfaces.
Edge and opening protection
Rigid protection around excavations, shafts and access points.
Reinforcement and forming
Mesh forms used within concrete, heating and surface preparation work.
Puntos de especificación que revisar
Confirme los valores con la documentación del proyecto. Estas indicaciones ayudan a organizar el primer intercambio técnico.
Site conditions
- Installation stage and duration
- Wind and impact exposure
- Public or controlled access
System definition
- Panel or roll dimensions
- Post and base arrangement
- Gate and corner requirements
Supply planning
- Reusable or permanent use
- Finish and visibility
- Packing by installation zone
Vistas de la aplicación
Las imágenes de referencia muestran entornos y relaciones entre productos habituales. No se presentan como proyectos de clientes.
Referencias de proyectos relacionados
Explorar la biblioteca de proyectos
Fabricated mesh panels for a plant service area
A fabricated panel package for separating service access and equipment zones in an industrial plant.
Temporary construction boundary package
A reusable temporary panel, gate and barrier package for a changing construction-site boundary.
Preguntas habituales de los compradores
Use las respuestas para preparar una consulta técnica, no como sustituto de la revisión del proyecto.
Should temporary and permanent mesh be quoted together?
They can be grouped in one inquiry, but identify each use and installation stage so the correct format, finish and packing plan can be reviewed.
What information helps BOHANG recommend a system?
Share the working environment, required function, dimensions, quantity, finish expectation and any drawings or local standards available for review.
Can several products be combined in one application?
Yes. A complete system may include mesh panels, posts, gates, fasteners and protective finishes. BOHANG can review the components as one supply package.
Envíe la aplicación y después los detalles.
Requisitos recomendados: Construction stage, site dimensions, required protection, quantity and drawings.